Kangertech Cupti

Kanger CuptiOhm My E-Cig Vape shop, has stock of this awesome little Device that fits like a glove in the hand. The Cupti is based on the Nebox but without any of the leaking issues. The Cupti has many new features that the Nebox was lacking. So lets have a look at some of this great mods Specs.

 

“A single 18650 battery, not included, powers the Cupti. Kangertech does include a charging cable that connects to the device via the micro USB port on the bottom of the mod. The battery door is spring loaded and also on the bottom of the Cupti.

The Kangertech Cupti Starter Kit has a wattage range of 7 – 75 watts. In temperature control mode it has a range of 200° F – 600° F and 100° C – 300° C. Power adjusts are in 0.1 watt increments and temperature adjustments are in 10° F and 5° C increments.

The internal tank has a 5 ml E-Liquid capacity. You fill the tank by unscrewing tip and coil connector assembly and lifting it out of the mod. Fill the tank, being careful not to go past the “MAX” line, and replace the coil connector.

There are three buttons on the Cupti, the fire button on the front of the mod, and the “+” and “-” buttons on top of the device. The LCD display is also on top of the Cupti. It will fire Nickel 200, Titanium, Stainless Steel and Nichrome coils in temperature control mode and standard coils in variable wattage mode.

When you attach a new coil to the CUPTI the display will read, “New Coil + yes, – no.” Press the appropriate button. If it is a new coil pressing “+” will calibrate its base resistance. If you attach a new coil and don’t get that prompt, unscrew the coil connector assembly and press the fire button until the display reads “Check Atomizer.” Then reattach the coil connector assembly and you should get the prompt.

To choose the type of coil you have attached click the fire button three times to cycle through each option, Nickel 200,Titanium, Stainless Steel, Nichrome and finally variable wattage mode. Adjust the temperature or wattage with the “+” and “-” buttons.

Hold in the “+” and “-” buttons at the same time to flip the orientation of the display by 180. When you’ve find a temperature or wattage setting that you’re satisfied with you can lock the “+” and “-” buttons by holding in all three buttons at the same time. This will display the “+” and “-” buttons and keep you from inadvertently changing your setting. Unlock those buttons by again holding in all three buttons simultaneously.”

Features:

It’ll fire a wide range of coils in TC mode and has a maximum power output of 75 watts.

Two coils are included with the CUPTI, a 0.5 ohm Stainless Steel CLOCC and a 1.5 ohm Nichrome CLOCC. CLOCC stands for child lock organic cotton coil, and they’ll also work with Kanger’s CLTANK and EVOD-PRO.

 

Whats in the Box

  • 1 X CUPTI
  • 1 X 0.5 ohm Stainless Steel CLOCC coil
  • 1 X 1.5 ohm Nichrome CLOCC coil
  • 1 X Spare drip tip
  • 1 X USB Charging cable
  • 1 X User’s manual

Please Feel Free to stop by Ohm My E-Cig Kloof Vape Store and Sample some juice and browse are hardware range.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *